[INCH-POUND]
A-A-52127
June 15, 1993
COMMERCIAL ITEM DESCRIPTION
PIN, NET, LAUNDRY, (5-INCH)
The General Services Administration has authorized the use of this commercial item description in preference to Federal Specification FF-P-419.
1. CLASSIFICATION.
1.1 Scope. This commercial item description covers one type and size of laundry net pin.
2. SALIENT CHARACTERISTICS
2.1 Materials. The materials used in the manufacture of laundry pins shall be of the quality normally used by the manufacturer for pins, providing that the completed item complies with all the provisions of this commercial item description.
2.1.1 Sheet and strip. Sheet and strip shall be alloy not less than 0.034 inch in thickness. The material shall conform to ASTM B 36 alloy number C26000 or C26800.
2.1.2 Wire. The wire shall be copper alloy conforming to ASTM B 134 alloy number C26000 or C27000, having a diameter of 0.141 to 0.159 inches.
2.2 Construction. Pins shall conform to the dimensions shown in figure 1. The clasp shall be formed of the sheet and strip specified in 2.1.1. The wire body shall conform to the wire specified in 2.1.2, and shall have a blunt point.
|
Beneficial comments, (recommendations, additions, deletions) and any pertinent data which may be used in improving this document should be addressed to: U.S. Army Natick Research, Development, and Engineering Center, Natick, MA 01760-5017 by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. |
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business