3. QUALITY ASSURANCE
3.1 Certification. The contractor shall certify, and maintain substantiating evidence, that the product offered meets the salient characteristics of this Commercial Item Description, and that the product conforms to the producer’s own drawings, specifications, standards, and quality assurance practices. . The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
3.2 Metric product. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, provided they fall within the tolerances specified using conversion tables contained in the latest revision of Federal Standard No. 376, and all other requirements of this commercial item description are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch-pound units, a request should be made to the contracting officer to determine if the product is acceptable. The contracting officer has the option of accepting or rejecting the product.
3.3 Regulatory requirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practicable.
4. PACKAGING
4.1 Packaging, packing, marking and palletization. Unless otherwise specified in the contract or purchase order, packaging, packing, marking and palletization shall be in accordance with ASTM D 3951, as specified for shipments to the Department of Defense (see 5.2).
5. NOTES
5.1 Intended use. Commercial dry-to-dry cleaning units are designed to dry clean clothes using perchloroethylene. Dry cleaning units are for use in an enclosed building. Electricity, steam, water, and compressed air will be required for operation.
5.2 Acquisition requirements. Acquisition documents must specify the following:
a. Title, number, and date of this document.
b. Size, control, and filtration system required for the dry cleaning unit (see 1.1).
c. Electrical characteristics, when other than specified (see 2.2).
d. The Government approved manual number is to be included on the data name plate when manuals are purchased under the contract (see 2.6).
e. Type of packaging, packing, marking and palletization requirements required (see 4.1).
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business