INCH-POUND
MIL-DTL-23581B(SH)
13 August 2009
SUPERSEDING
MIL-T-23581A(SH)
3 August 1992
DETAIL SPECIFICATION
TUMBLER, DRYING, LAUNDRY, COMMERICAL (SUBMARINE SERVICE)
Reinstated after 13 August 2009 and may be used for new and existing designs and acquisitions.
This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is
available for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers 16-pound (minimum) capacity commercial laundry drying tumbler
machines for use aboard submarines.
1.2 Classification. Drying tumblers are of the following types, as specified (see 6.2).
Type I Shock qualified (see 3.7.5)
Type II Not shock qualified (see 3.7.5)
1.3 Part or Identifying Number (PIN). PINs to be used for drying tumblers acquired to this specification are
created as follows:
M
23581
-
X
Prefix for Military Specification
Specification Number
Type (see code below)
Code
Type
1
- Type I: Shock qualified
2
-
Type II: Not shock qualified
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
Comments, suggestions, or questions on this document should be addressed to: Commander, Naval Sea Systems
Command, ATTN: SEA 05M2, 1333 Isaac Hull Avenue, SE, Stop 5160, Washington Navy Yard DC 20376-5160
or emailed to CommandStandards@navy.mil, with the subject line "Document Comment". Since contact
information can change, you may want to verify the currency of this address information using the ASSIST Online
database at https://assist.daps.dla.mil.
AMSC N/A
FSC 3510
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business