SUPERSEDING
MIL-D-44144(GL)
27 September 1984
MILITARY SPECIFICATION
DRYING TUMBLER, LAUNDRY
This specification is approved for use by the U.S. Army Natick Research,
Development, and Engineering Center, Department of the Army and is available
for use by all Departments and Agencies of the Department of Defense,
1.
SCOPE
1.1 Scope. This document covers a fuel fired drying tumbler (see 6.1) with a
load capacity of not less than 120 pounds dry weight of laundry per hour.
2.
APPLICABLE DOCUMENTS
2.1 Government documents,
2.1.1 Documents. The following documents form a part of this document to the
extent specified herein. Unless otherwise specified, the issues of these
documents shall be those listed in the issue of the Department of Defense Index
of Specifications and Standards (DODISS) and supplement thereto, cited in the
solicitation.
SPECIFICATIONS
FEDERAL
HH-I-553
- Insulation Tape, Electrical (Rubber, Natural and
Synthetic)
QQ-S-571 - Solder, Tin Alloy: Tin Lead Alloy; and Lead Alloy
FSC 3510
AMSC N/A
DISTRIBUTION STATEMENT A.
Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business