INCH POUND
MIL-DTL-1407D
17 AUGUST 2009
SUPERSEDING
MIL-P-1407C
20 March 1968
DETAIL SPECIFICATION
PIN SET, MARKING, LAUNDRY
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 This specification covers one type of laundry marking pin set, complete with carrier cases, trays, and
numbered and plain pins, furnished either as complete sets or as individual components (see 6.2).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in section 3, 4, or 5 of this standard. This
section does not include documents cited in other sections of this standard or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in section 3, 4, or 5 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents
are those cited in the solicitation or contract.
FEDERAL SPECIFICATIONS
QQ-S-698
Steel, Sheet and Strip, Low Carbon
TT-C-490
Chemical Conversion Coatings and Pretreatments for Ferrous Surfaces (Base for
Organic Coatings)
FEDERAL STANDARDS
FED-STD-595/24084
Green, Semigloss
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-130
Identification Marking of U.S. Military Property
(Copies of these documents are available online at https://assist.daps.dla.mil or from the Standardization
Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
Comments, suggestions, or questions on this document should be addressed to Defense Supply Center
Philadelphia (DSCP), ATTN: DSCP-NASA, 700 Robbins Avenue, Philadelphia, PA 19111-5096 or e-mail to
dscpg&inspecomments@dla.mil . Since contact information can change, you may want to verify the currency of
this address information using ASSIST Online database at https://assist.daps.dla.mil .
FSC 3510
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business