MIL-DTL-1407D
TABLE II. Classification of defects (cont'd)
Classification
Examine
Defect
Major
Minor
Workmanship and
construction (cont'd)
Lid
Does not set properly on body without
forcing
X
Crimping, cracked or fractured, or not
tight
X
Hinge secured to lid with less than 7
spot welds
X
Edges not crimped (except at hinge
attachment)
X
Body
Less than 8 assembly spot welds on
X
each end
Not 3 partitions
X
Partitions secured to body with less than
13 spot welds
X
Partition ends not cut at 45 degrees on
X
side welded to body
Assembly (final)
Missing component
X
Tray does not fit carrier
X
Carrier will not close with trays in place
X
Carrier will not latch with trays in place
X
Crimped edges not tight
X
X
Wrong quantity of pins
Sharp edges, burrs or cracks not
removed
X
Identification (pins)
Numbering not embossed
X
Number or letter incorrect or illegible
X
Tray
Identification numbering incorrect
X
Carrier case
Identification numbering missing or
incorrect
X
4.2.3.2 Dimensional examination. Inspection shall be made of pin sets for compliance with dimensions
specified. Any deviation from specified requirements shall constitute a defect. The inspection level shall be S-2
with an AQL of 4.0, expressed in terms of defects per hundred units.
5. PACKAGING.
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract or
order (see 6.2). When packaging of materiel is to be performed by DoD or in-house contractor personnel, these
personnel need to contact the responsible packaging activity to ascertain packaging requirements. Packaging
requirements are maintained by the Inventory Control Point's packaging activities within the Military Service or
Defense Agency, or within the military service's system commands. Packaging data retrieval is available from
then managing Military Department's or Defense Agency's automated packaging files, CD-ROM products, or by
contacting the responsible packaging activity
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business