INCH POUND
MIL-DTL-2211F
29 JULY 2008
SUPERSEDING
MIL-T-2211E
21 JUNE 1973
DETAIL SPECIFICATION
TABLE, LAUNDRY, FOLDING, 3 BY 8 FEET
INACTIVE FOR NEW DESIGN AFTER 29 JULY 2008
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 This specification covers one type and size of folding laundry table (see 6.1).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in section 3, 4, or 5 of this standard. This
section does not include documents cited in other sections of this standard or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list,
document users are cautioned that they must meet all specified requirements of documents cited in sections 3,
4, or 5 of this standard, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, Standards, and handbooks. The following specifications, standards and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified,
the issues of these documents are those cited in the solicitation or contract.
FEDERAL SPECIFICATIONS
QQ-S-698
Steel, Sheet and Strip, Low Carbon
TT-C-490
Chemical Conversion Coatings and Pretreatments for Ferrous Surfaces
(Base for Organic Coatings)
FEDERAL STANDARDS
FED-STD-595/24084
Green, Semigloss
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-130
Identification Marking of U.S. Military Property
(Copies of these documents are available online at https://assist.daps.dla.mil. or from the
Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-
5094.)
Comments, suggestions, or questions on this document should be addressed to Defense Supply Center
Philadelphia (DSCP), ATTN: DSCP-NASA, 700 Robbins Avenue, Philadelphia, PA 19111-5096 or e-mail
to dscpg&inspecomments@dla.mil. Since contact information can change, you may want to verify the
currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 3510
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business