MIL-DTL-2211F
TABLE I. In-process inspection.
Requirement
Requirements
paragraph
Application of varnish prior to assembly.
3.3.5.1
Cleaning and application of enamel on metal surfaces.
3.3.5.2
4.3.3 End item inspection. A lot shall consist of all tables offered for inspection at one time. The
sample unit shall be one completely fabricated folding laundry table.
4.3.3.1 Visual examination. The completely assembled end item shall be examined for defects as
specified in table II. The Inspection level shall be level II and the acceptable quality limits (AQLs)
shall be 4.0 for major defects and 10 total defects, expressed in terms of defects per hundred units.
TABLE II. Classification of defects.
Classification
Examine
Defect
Major
Minor
X
Finish
Plywood not varnish
X
Steel components not enameled
Enameled not matched to color 24084,
X
FED-STD-595
X
Not continuous or adherent
Discoloration, or imbedded foreign
X
matter
Sags, runs, drips, creeps, laps, bubbles,
streaks, wrinkles, blisters, lumps, or
X
orange peel
Rust, grind or tool marks that show
through finish
X
X
Construction and
Fractures, splits, punctures, or dents
X
Sharp edges, silver, burr or projections
workmanship
Fastening assembly bolt not peened or
(applicable to all
secured with hex nut and washer
X
components and
Battens not recessed
X
assemblies)
Table top
Battens not glued and screwed to table
X
top
X
Carriage bolt heads not countersunk
X
Top of edging and table not flush
Fastening assembly missing
X
Legs
Stretcher missing
X
Do not fold properly
X
Brace not cut to fit stretcher
X
Omitted
X
Welding
Burn holes, cracks, fractures, or
incomplete fusion
X
Scale or flux deposits not removed
X
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business